https://forum.keexybox.org/ Thu, 30 Apr 2026 13:32:20 +0000 MyBB https://forum.keexybox.org/Thread-Solved-Wifi-configuration Sun, 04 Jul 2021 10:37:29 +0000 diozea]]> https://forum.keexybox.org/Thread-Solved-Wifi-configuration
I finished to setup keexybox for website filtering and anonymity topology with a raspberry pi 4.
Wifi form is filled. 
But any wifi signal is broadcast by the raspberry.(As I understand, Pi 4 can act as an AccessPoint natively, Am I wrong?)
Keexybox GUI can't start hostapd service. The service is stopped.

On SSH, Raspberry warn me:
Wi-Fi is currently blocked by rfkill.
Use raspi-config to set the country before use.

raspi-config shows an error when I try to setup WLAN country:
Could not communicate with wpa_supplicant

pi@raspberrypi:~ $ cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1


pi@raspberrypi:/opt/keexybox/hostapd/etc $ cat hostapd.conf
# GENERATED BY KEEXYBOX WEBUI
# DO NOT EDIT THIS FILE

# General
ssid=WifiNobel-keexy
interface=wlan0
bridge=br0
country_code=FR
hw_mode=g
channel=10
wmm_enabled=1
macaddr_acl=0

# Security
ignore_broadcast_ssid=0
auth_algs=1
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
wpa_passphrase=mypassword


Do I miss something?]]>
I finished to setup keexybox for website filtering and anonymity topology with a raspberry pi 4.
Wifi form is filled. 
But any wifi signal is broadcast by the raspberry.(As I understand, Pi 4 can act as an AccessPoint natively, Am I wrong?)
Keexybox GUI can't start hostapd service. The service is stopped.

On SSH, Raspberry warn me:
Wi-Fi is currently blocked by rfkill.
Use raspi-config to set the country before use.

raspi-config shows an error when I try to setup WLAN country:
Could not communicate with wpa_supplicant

pi@raspberrypi:~ $ cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1


pi@raspberrypi:/opt/keexybox/hostapd/etc $ cat hostapd.conf
# GENERATED BY KEEXYBOX WEBUI
# DO NOT EDIT THIS FILE

# General
ssid=WifiNobel-keexy
interface=wlan0
bridge=br0
country_code=FR
hw_mode=g
channel=10
wmm_enabled=1
macaddr_acl=0

# Security
ignore_broadcast_ssid=0
auth_algs=1
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
wpa_passphrase=mypassword


Do I miss something?]]>