KeexyBox's forum › System settings › Date and time
Clock Unsynchronized

Clock Unsynchronized

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
vit Offline
Junior Member
**
Posts: 8
Threads: 4
Joined: May 2021
Reputation: 0
#1
05-04-2021, 12:12 AM (This post was last modified: 05-04-2021, 12:29 AM by vit.)
Error on NTPD TIME, anyone can help?

2021-05-03 20:42:22 - /usr/bin/sudo /etc/init.d/ntp status
2021-05-03 20:42:22 - * ntp.service - Network Time Service
2021-05-03 20:42:22 -    Loaded: loaded (/lib/systemd/system/ntp.service; enabled; vendor preset: enabled)
2021-05-03 20:42:22 -    Active: active (running) since Mon 2021-05-03 19:43:38 -03; 58min ago
2021-05-03 20:42:22 -      Docs: man:ntpd(8)
2021-05-03 20:42:22 -  Main PID: 994 (ntpd)
2021-05-03 20:42:22 -    Tasks: 2 (limit: 4464)
2021-05-03 20:42:22 -    Memory: 2.4M
2021-05-03 20:42:22 -    CGroup: /system.slice/ntp.service
2021-05-03 20:42:22 -            `-994 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:110
2021-05-03 20:42:22 -
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: restrict ::: KOD does nothing without LIMITED.
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen and drop on 0 v6wildcard [::]:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen and drop on 1 v4wildcard 0.0.0.0:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen normally on 2 lo 127.0.0.1:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listening on routing socket on fd #19 for interface updates
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: Listen normally on 3 br0 192.168.0.111:123
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: Listen normally on 4 br0:0 192.168.2.254:123
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: new interface(s) found: waking up resolver
2021-05-03 20:42:23 - /usr/bin/sudo /opt/keexybox/keexyapp/src/Shell/scripts/init_tor status
Find
Reply
vit Offline
Junior Member
**
Posts: 8
Threads: 4
Joined: May 2021
Reputation: 0
#1
05-04-2021, 12:12 AM (This post was last modified: 05-04-2021, 12:29 AM by vit.)
Error on NTPD TIME, anyone can help?

2021-05-03 20:42:22 - /usr/bin/sudo /etc/init.d/ntp status
2021-05-03 20:42:22 - * ntp.service - Network Time Service
2021-05-03 20:42:22 -    Loaded: loaded (/lib/systemd/system/ntp.service; enabled; vendor preset: enabled)
2021-05-03 20:42:22 -    Active: active (running) since Mon 2021-05-03 19:43:38 -03; 58min ago
2021-05-03 20:42:22 -      Docs: man:ntpd(8)
2021-05-03 20:42:22 -  Main PID: 994 (ntpd)
2021-05-03 20:42:22 -    Tasks: 2 (limit: 4464)
2021-05-03 20:42:22 -    Memory: 2.4M
2021-05-03 20:42:22 -    CGroup: /system.slice/ntp.service
2021-05-03 20:42:22 -            `-994 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 104:110
2021-05-03 20:42:22 -
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: restrict ::: KOD does nothing without LIMITED.
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen and drop on 0 v6wildcard [::]:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen and drop on 1 v4wildcard 0.0.0.0:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listen normally on 2 lo 127.0.0.1:123
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: Listening on routing socket on fd #19 for interface updates
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2021-05-03 20:42:22 - May 03 19:43:39 p1 ntpd[994]: kernel reports TIME_ERROR: 0x41: Clock Unsynchronized
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: Listen normally on 3 br0 192.168.0.111:123
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: Listen normally on 4 br0:0 192.168.2.254:123
2021-05-03 20:42:22 - May 03 19:43:41 p1 ntpd[994]: new interface(s) found: waking up resolver
2021-05-03 20:42:23 - /usr/bin/sudo /opt/keexybox/keexyapp/src/Shell/scripts/init_tor status
Find
Reply
paul Offline
Super Moderator
******
Posts: 34
Threads: 0
Joined: Apr 2020
Reputation: 2
#2
05-10-2021, 08:20 AM
Can you give us the outputs of the following commands:



Code:
cat /etc/ntp.conf
ntpq -pn
Find
Reply
paul Offline
Super Moderator
******
Posts: 34
Threads: 0
Joined: Apr 2020
Reputation: 2
#2
05-10-2021, 08:20 AM
Can you give us the outputs of the following commands:



Code:
cat /etc/ntp.conf
ntpq -pn
Find
Reply
Vangerdahast Offline
Junior Member
**
Posts: 6
Threads: 2
Joined: Oct 2021
Reputation: 0
#3
10-28-2021, 08:48 AM
Hello all of you,

I noticed that my NTP setup isn't functioning as well.
There is no connection to the internet and
sudo apt-get update
won't connect to the repositories which are needed for an update.

During the installation I sticked to the descriptions and while being able to connect to the internet via KeexyBox it is not possible for the Pi itself to use the ETH0 Connection (bridge is from wlan0 to eth0).

Is someone able to help me in such a way that I can solve this?
Find
Reply
Vangerdahast Offline
Junior Member
**
Posts: 6
Threads: 2
Joined: Oct 2021
Reputation: 0
#3
10-28-2021, 08:48 AM
Hello all of you,

I noticed that my NTP setup isn't functioning as well.
There is no connection to the internet and
sudo apt-get update
won't connect to the repositories which are needed for an update.

During the installation I sticked to the descriptions and while being able to connect to the internet via KeexyBox it is not possible for the Pi itself to use the ETH0 Connection (bridge is from wlan0 to eth0).

Is someone able to help me in such a way that I can solve this?
Find
Reply
emmsch Offline
Junior Member
**
Posts: 4
Threads: 2
Joined: Dec 2021
Reputation: 0
#4
12-20-2021, 07:43 PM
(10-28-2021, 08:48 AM)Vangerdahast Wrote: Hello all of you,

I noticed that my NTP setup isn't functioning as well.
There is no connection to the internet and
sudo apt-get update
won't connect to the repositories which are needed for an update.

During the installation I sticked to the descriptions and while being able to connect to the internet via KeexyBox it is not possible for the Pi itself to use the ETH0 Connection (bridge is from wlan0 to eth0).

Is someone able to help me in such a way that I can solve this?

I faced the same problem. Solved it by adding google DNS 8.8.4.4 to DNS 2 in the DNS and gateway settings in the Keexybox. Hope this helps.
Find
Reply
emmsch Offline
Junior Member
**
Posts: 4
Threads: 2
Joined: Dec 2021
Reputation: 0
#4
12-20-2021, 07:43 PM
(10-28-2021, 08:48 AM)Vangerdahast Wrote: Hello all of you,

I noticed that my NTP setup isn't functioning as well.
There is no connection to the internet and
sudo apt-get update
won't connect to the repositories which are needed for an update.

During the installation I sticked to the descriptions and while being able to connect to the internet via KeexyBox it is not possible for the Pi itself to use the ETH0 Connection (bridge is from wlan0 to eth0).

Is someone able to help me in such a way that I can solve this?

I faced the same problem. Solved it by adding google DNS 8.8.4.4 to DNS 2 in the DNS and gateway settings in the Keexybox. Hope this helps.
Find
Reply
Vangerdahast Offline
Junior Member
**
Posts: 6
Threads: 2
Joined: Oct 2021
Reputation: 0
#5
02-22-2022, 02:36 PM
I solved it by checking on the gateway and WLAN Access Point Settings (my Keexybox is just for filtering, not for DHCP services) and there it goes.
Find
Reply
Vangerdahast Offline
Junior Member
**
Posts: 6
Threads: 2
Joined: Oct 2021
Reputation: 0
#5
02-22-2022, 02:36 PM
I solved it by checking on the gateway and WLAN Access Point Settings (my Keexybox is just for filtering, not for DHCP services) and there it goes.
Find
Reply


Forum Jump:


Users browsing this thread: 4 Guest(s)