input output settings and dhcp

[shak4031]

I had the same confusion, but the below worked for me.  This is for using Keexybox as primary entry point for all devices (DNS/DHCP/Gateway).

1) set Input network to different subnet then your primary router.
      ex. Router IP is 192.168.1.1
             interface eth0 (for both input and output)
             input to 192.168.2.254
             output to 192.168.1.254

[shak4031]

I had the same confusion, but the below worked for me.  This is for using Keexybox as primary entry point for all devices (DNS/DHCP/Gateway).

1) set Input network to different subnet then your primary router.
      ex. Router IP is 192.168.1.1
             interface eth0 (for both input and output)
             input to 192.168.2.254
             output to 192.168.1.254